Sewer check valve DN 200

Sewer check valve DN 200

The sewer backflow preventer DN 200 effectively protects rooms located on the lowest floors from flooding caused by rainwater or sewage backflow. Backflow can be caused by heavy rainfall, snow melt or flooding. This backflow preventer shall be mounted horizontally. Advantages and use of the sewer backflow preventer DN 200: made of high quality, corrosion-resistant, durable polypropylene, resistant to negative temperatures and chemicals effectively protects against rodents prevents the release of unpleasant odours careful design high-quality materials used in the manufacturing process interior of the device with smooth and properly profiled surface prevents the accumulation of sediments and ensures unhindered flow of sewage The highest quality flexible materials with increased resistance to weathering and ageing have been used for the production of the seals The use of flood protection devices in low-lying rooms is required by the applicable technical regulations, which buildings must comply with. Properties of the DN 200 sewer backflow preventer: the damper housing as well as all fastening elements (bolts, nuts, washers) are made of chrome-nickel stainless steel the backflow preventer is equipped with a manual closing lever by moving the lever from the OPEN A to the CLOSED B position the backflow of sewage water is completely stopped the total deflection of the damper ensures 100% flow through the pipeline simple and efficient closing mechanism easy assembly self-functioning, requires no external power supply maximum operating temperature 95°C maximum operating pressure 0.5 bar valve has successfully passed the series of tests required by PN-EN 13564 and has been awarded the CE marking Technical drawing:

koupit
Přidat hodnocení
Shaft bottom with check valve 400/160

Shaft bottom with check valve 400/160

A manhole bottom backflow preventer is a device that effectively blocks the backflow of sewage. Advantages of a backflow preventer: effective protection of buildings low cost and easy installation possibility of removing the check damper on the ground surface without entering the manhole no need to call a specialist for maintenance resistance to corrosion, negative temperatures and chemicals the valve has successfully passed a series of tests required by PN-EN 13564 and has been awarded the CE marking The

koupit
Sewer check valve DN 110

Sewer check valve DN 110

The sewer backflow preventer DN 110 effectively protects rooms located on the lowest floors from flooding caused by rainwater or sewage backflow. Backflow can be caused by heavy rainfall, snow melt or flooding. People also sometimes use the DN 100 designation, however, these dampers are identical. It is always the same product, namely DN 110. This check damper must be installed horizontally. Advantages and uses of the DN 110 sewer check valve: made of high quality, corrosion-resistant, durable polypropyle

koupit
Sewer check valve DN 160

Sewer check valve DN 160

The sewer backflow preventer DN 160 effectively protects rooms located on the lowest floors from flooding caused by rainwater or sewage backflow. Backflow can be caused by heavy rainfall, snow melt or flooding. People also sometimes use the DN 150 designation, however, these dampers are identical. It is always the same product, namely DN 160. This check damper must be installed horizontally. Advantages and uses of the sewer check valve DN 160: made of high quality, corrosion-resistant, durable polypropyle

koupit
Check valve - 1/2 Mx3/8 M IVAR.VARIA ZK

Check valve - 1/2 Mx3/8 M IVAR.VARIA ZK

Check Valve - 1/2 Mx3/8 M PN 10, T = +120 °C external thread - internal MF material brass CW617N

koupit
Check Valve - 3/8 Mx3/8 F IVAR.VARIA ZK

Check Valve - 3/8 Mx3/8 F IVAR.VARIA ZK

Check Valve - 3/8 Mx3/8 F PN 10, T = +120 °C external thread - internal MF material brass CW617N

koupit
End sewer flap DN 160

End sewer flap DN 160

The end sewer flap DN 160 effectively protects the installations against the entry of rats into the building. The sewer end flap is not a shut-off fitting. Advantages of the end sewer flap DN 160: it is made of plastic with the addition of a stabiliser to increase resistance to sunlight and other weather conditions the specially designed drainage end valve protects drainage installations from backflow and clogging in the event of water level rising above the drain level it is installed directly at the end

koupit
End sewer flap DN 110

End sewer flap DN 110

The end sewer flap DN 110 effectively protects the installations against the entry of rats into the building. The sewer end flap is not a shut-off fitting. Advantages of the sewer end flap DN 110: it is made of plastic with the addition of a stabiliser to increase resistance to sunlight and other weather conditions the specially designed drainage end valve protects drainage installations from backflow and clogging in the event of water level rising above the drain level it is installed directly at the end

koupit
End sewer flap DN 200

End sewer flap DN 200

The end sewer flap DN 200 effectively protects the installations against the entry of rats into the building. The sewer end flap is not a shut-off fitting. Advantages of the end sewer flap DN 200: it is made of plastic with the addition of a stabiliser to increase resistance to sunlight and other weather conditions the specially designed drainage end valve protects drainage installations from backflow and clogging in the event of water level rising above the drain level it is installed directly at the end

koupit
Check valve EURA - light, 1/2 FF, Kv 4,27

Check valve EURA - light, 1/2 FF, Kv 4,27

Check valve EURA - light, FIV.08030, Dimension: 1/2" FF, Package: 20 pcs PN 16, T = +80 °C

koupit
Sewer check valve DN 125

Sewer check valve DN 125

The sewer backflow preventer DN 125 effectively protects rooms located on the lowest floors from flooding caused by rainwater or sewage backflow. Backflow can be caused by heavy rainfall, snow melt or flooding. This backflow preventer shall be mounted horizontally. Advantages and use of the sewer backflow preventer DN 125: made of high quality, corrosion-resistant, durable polypropylene, resistant to negative temperatures and chemicals effectively protects against rodents prevents the release of unpleasan

koupit
Check valve, 1/4 F x 1/2 M

Check valve, 1/4 F x 1/2 M

Backflap, IVAR.ACVR, size: 1/4" F x 1/2" M check valve for thermomanometers and manometers

koupit
Check valve EURA - light, 3/4 FF, Kv 7,11

Check valve EURA - light, 3/4 FF, Kv 7,11

Check valve EURA - light, FIV.08030, Dimension: 3/4" FF, Packing: 12 pcs PN 16, T = +80 °Copening overpressure 0.02 barflow rate Kv 7.11thread internal - internal FF

koupit
Check valve EURA light - 5/4 FF; Kv 19,45 FIV.08030

Check valve EURA light - 5/4 FF; Kv 19,45 FIV.08030

Check valve EURA light - 5/4 FF; Kv 19,45 PN 16 - 1/2 to 1 , PN 10 - 5/4 to 2 , T = +80 °C Opening overpressure 0.02 bar internal thread - internal FF material brass CW617N, polymer orifice ATEST for drinking water

koupit
Check valve EURA light - 1 FF; Kv 10,91 FIV.08030

Check valve EURA light - 1 FF; Kv 10,91 FIV.08030

Check valve EURA light - 1 FF; Kv 10,91 PN 16 - 1/2 to 1 , PN 10 - 5/4 to 2 , T = +80 °C Opening overpressure 0.02 bar internal thread - internal FF material brass CW617N, polymer orifice ATEST for drinking water

koupit
Check valve EURA heavy - 1 FF; Kv 4,50 FIV.08018

Check valve EURA heavy - 1 FF; Kv 4,50 FIV.08018

Eura heavy duty check valve - 1 FF; Kv 4,50 PN 15, T = +90 °C opening overpressure 0,02 bar internal thread - internal FF material brass CW617N, polymer orifice ATEST for drinking water

koupit